Industrial Field Engineering & Commissioning Services
Field engineering supports the drive, motor and energy equipment we engineer and supply: site assessment, installation supervision, commissioning, troubleshooting and continuing technical support — planned around the access, power and safety conditions of the actual site.
We perform technical work directly and coordinate specialized services through qualified contractors, carriers and equipment providers. Which is which is agreed in writing before mobilization — not assumed on site.
What we support
Service areas rather than fixed packages. Each engagement is scoped against the equipment, the site and the schedule, and states who performs each part of the work.
Industrial equipment installation support
Technical supervision and installation support for drives, electrical equipment and mechanical assemblies — setting out the installation requirement and verifying it is met.
Direct supervision, trades subcontractedCommissioning and startup support
Motor commissioning, conveyor drive commissioning and BESS commissioning: pre-energization checks, functional testing, control-configuration support and structured handover to the operating team, against the equipment supplier's documented procedure.
DirectTroubleshooting and technical coordination
Fault investigation on installed equipment, coordination with the OEM or supplier, and definition of the corrective scope so site work can be planned rather than improvised.
DirectPreventive and corrective field-service coordination
Planning scheduled service intervals and organizing corrective interventions — scope, parts, access, personnel and the documentation returned afterwards.
Coordinated; execution direct or via qualified contractorsRemote monitoring and technical support
Off-site technical support and remote review of equipment data where the installed system and site communications allow it, supporting site personnel between visits.
Direct, subject to site connectivityTemporary power and energy-system deployment support
Support for deploying temporary and transitional power arrangements, including energy storage and hybrid arrangements, from siting and interface definition through energization support.
Direct engineering, licensed work subcontractedRemote site and field support
On-site and remotely coordinated support for operating and developing sites, structured around the site's access window, working conditions and available infrastructure.
Direct and coordinatedProject mobilization and deployment coordination
Planning and sequencing a mobilization: what has to reach site, in what order, with which personnel, under which access and site-entry requirements.
Direct coordinationEquipment and material logistics coordination
Coordinating movement of equipment and materials to remote and seasonal-access sites through carriers, freight forwarders and logistics providers, including staging and receipt at site.
Coordinated through third-party providersExploration and temporary-site infrastructure support
Support for exploration programs and temporary sites: infrastructure requirements, power and equipment arrangements, and coordination of the providers who deliver them.
Coordinated through qualified providers
Performed directly, or coordinated through qualified third parties
MotiraTech is an engineering and coordination company. Specialized assets and licensed trades are engaged through qualified providers, and the responsible party for each activity is identified in the project scope.
- Technical scoping of the field requirement and the work plan
- Engineering and technical supervision during installation
- Commissioning, functional testing and startup support
- Troubleshooting, fault investigation and corrective-scope definition
- Coordination of mobilization, logistics, personnel and site interfaces
- Remote technical support and post-service documentation
- Transportation, freight, air support and heavy haul — through carriers and logistics providers
- Licensed electrical and mechanical trade labour — through qualified contractors
- Heavy equipment, cranes and lifting services — through equipment providers
- Camp, accommodation and catering services — through site operators or providers
- Satellite and site communications services — through service providers
- OEM-restricted warranty work — through the equipment manufacturer
What determines how field work is planned
Remote work is governed less by the task than by the conditions around it. These are established before a scope is confirmed.
Access and transportation
Road, winter road, barge, rail, air or seasonal access — and the window in which the work has to occur.
Temporary power
What power is available for the work itself, and what has to be brought in, connected and later removed.
Communications
Site connectivity available to field personnel, and what it means for remote support and data transfer.
Equipment staging
Laydown, receiving, lifting capability and storage conditions for equipment held at site before installation.
Workforce coordination
Rotations, accommodation and camp availability, site inductions and the interface with the site's own crews and contractors.
Environmental and safety requirements
Seasonal and environmental conditions at the site, plus the site's own contractor prequalification, permitting and safety requirements.
Where these services apply
Operations and projects where equipment, access and schedule constraints have to be handled together.
Mining and mineral processing
Mineral exploration programs
Energy and power generation
Infrastructure and construction projects
Heavy industrial and processing plants
How a field-services engagement begins
A representative sequence. Stages are confirmed per project — some run in parallel, and not every engagement requires all of them.
- STEP 01
Field requirement
You describe the site, the equipment involved and what has to be achieved — including the schedule and access window.
- STEP 02
Technical review
We review the requirement against the equipment, site conditions and documentation available, and identify what still has to be established.
- STEP 03
Scope definition
The work is written down: activities, who performs each part, personnel, duration, and the interfaces with the site and its contractors.
- STEP 04
Planning and prequalification
Site access, contractor prequalification, documentation and safety requirements are worked through before mobilization is confirmed.
- STEP 05
Mobilization
Personnel, equipment and materials are sequenced to site with the logistics providers appropriate to the access route.
- STEP 06
Execution
Installation, commissioning or corrective work is carried out and supervised against the agreed scope and the equipment procedures.
- STEP 07
Handover and documentation
Results, settings, outstanding items and recommendations are documented and handed to the site or project team.
- STEP 08
Follow-up support
Remote technical support after the visit, and planning of any subsequent scheduled or corrective intervention.
Have a site requirement with a defined access window?
Send the site, the equipment and the schedule. We will respond with what can be supported, how it would be staged, and what still has to be established.
PMDD drive systems
Drive engineering, retrofit assessment and commissioning for permanent magnet direct drive equipment.
Conveyor drive systems
Direct drive and conventional conveyor drive assessment, integration and commissioning for heavy industry.
Industrial BESS
Integration, EMS coordination and commissioning for battery energy storage systems.
Mining operations
Field engineering at mine sites, processing plants and remote operations.
Information required to scope a field engagement
Send what is available. Location, equipment and schedule are usually enough for a first response; the remainder is needed before a firm scope, mobilization plan or quotation.
- Project / site location
- Site, nearest community and access route
- Industry / project type
- Mine, exploration program, plant, utility, infrastructure
- Required service
- Installation, commissioning, troubleshooting, mobilization, other
- Project schedule
- Target dates, access window and any shutdown constraints
- Access conditions
- Road, winter road, air, barge, rail; seasonal limitations
- Equipment involved
- Make, model, rating and available documentation
- Electrical / mechanical scope
- What is being installed, modified or serviced
- Available site infrastructure
- Power, laydown, lifting, workshop, communications
- Accommodation / logistics
- Camp availability, rotations, travel arrangements
- Safety and contractor requirements
- Prequalification, permits, site-specific rules
- Required documentation
- Insurance, procedures, certificates, reporting formats
- Client / EPC / site contacts
- Responsible technical and site contacts
Discuss a field requirement
Tell us the site, the equipment and the window. We will tell you what we can support directly, what would be coordinated, and what has to be confirmed first.